Media

Fruit Processing Machine Manufacturer Tells You How To Maintain Processing Equipment

                       
Update:21-03-2019
Abst:

Users of food processing equipment know that the mainte […]

Users of food processing equipment know that the maintenance of equipment is particularly important. Proper use and maintenance can greatly extend the life of the equipment, so what is the correct repair and maintenance, Fruit Processing Machine manufacturers teach you to take the following ways to maintain and adjust.

The first is the replacement of the stepless speed change.

The fuel supply and replacement of the gearless gearbox oil are first to stop the motor. It is strictly forbidden to remove the oil plug when the fireworks are exhausted. The oil just flows out to the appropriate amount. If it is insufficient, it should be replenished.

The second is the adjustment of the chain. The adjustment is made after the motor is stopped. The chain is pressed by the fingers in the middle of the two sprockets. The compression is generally between 4 and 9 mm, which is the standard value. Adjust the idler to the specified tightness.

Third, the adjustment of the belt

After the motor is stopped, at the middle of the two pulleys, the compression amount of the belt (middle finger and index finger) is 7 to 12 mm as a standard value. When it is greater than the standard value, adjust the idler to the specified tightness.

Fourth, we don’t use it for a long time.

When we want to save for a long time without using it, we can clean and clean all parts of the earth, etc., and the rotating parts and the attached objects such as belts and chains should be completely removed and the rotating parts should be completely removed. And rub the active part, fully oiling to prevent the occurrence of rust.